06 October 2010

Polished Cluster covers

As you can see the cover for the JDM clusters was scratched and covered with scuff marks

After hours of sanding with high grit sand paper (1500 & 2000) and finish it by polishing with MEGUIAR PlastX. This is the result, pretty happy with it.

Some tip:
1. Sand it IN water, u will get a better finish.
2. Sand in different direction for different grit of paper. eg 1500 grit vertical, 2000 grit horizontal.
So that u will know if u managed to sand away the previous layer.
3. Keep buffing using the PlastX or similar product. Do a small area at a time.

No comments:

Post a Comment